Flange Turbine Flow Meter

We provide industry-leading Flange Turbine Flow Meter with high precision and an impressive temperature operating range.

Category: Turbine Flow Meter

ENQUIRY!

Description

Product Description

We provide industry-leading Flange Turbine Flow Meter with high precision and an impressive temperature operating range. It is used to measure the volume flow of low viscosity liquid in closed pipe. Flange Turbine Flow Meter first converts the flow rate into the rotational speed of the turbine, and then converts the rotational speed into an electrical signal proportional to the flow. This kind of flowmeter is used to detect instantaneous flow and total integrated flow, and its output signal is frequency, which is easy to digitize.

Advantages

Flange Turbine Flow Meter is a speed meter with the advantages of high accuracy, good repeatability, simple structure, low pressure loss and convenient maintenance. It is an economic flow solution offering outstanding accuracy with a bearing construction which gives highly reliable performance over long periods. It is widely used in industries such as petroleum, chemical industry, metallurgy, urban gas pipeline network, etc.

Advantage and Service:

Weighing/Volumetric calibration; Accuracy:+-0.5%/0.2%; Standard products could be delivery in one day; Economical cost but high reliabilty;

Compact design,Light weight,save your air freight;

2 years Warranty;

Provide installation vedio;

Full refund in case of bad quality;

Widely Application:

Distilled water,

Milk,

Drink,

Alcohol,

Demineralized Water,

Clean Water,

Diesel,

Fuel Oil,

Glycol,

Hydraulic Lubrication,

HVAC System,etc.

Technical Parameters

Technical Performance Parameters

Size & Process Connection	Thread connection:DN4,6,10,15,20,32,40,50,65,80,100 Flange connection:DN15,20,32,40,50,65,80,100,125,200 Clamp connection:DN4,6,10,15,20,32,40,50,65,80,100
Accuracy	±0.5%, ±0.2% Optional
Sensor Material	SS304, SS316L Optional
Ambient Conditions	Medium temperature:-20℃~+150℃ Atmospheric pressure:86Kpa~106Kpa Ambient temperature:-20℃~+60℃ Relative humidity:5%~90%
Signal Output	Pulse, 4-20mA, Alarm(optional)
Digital Communication	RS485, MODBUS; HART
Power Supply	24V DC/3.6V Lithium Battery
Cable Entry	M20*1.5; 1/2″NPT
Explosion-proof class	Ex d IIC T6 Gb
Protection class	IP65; IP67 Optional

Flow Range

Diameter (mm)	Standard Range (m3/h)	Extended Range (m3/h)	Connection Standard(Optional)	Standard Pressure (Mpa)	Customized Pressure Rating(Mpa)
DN4	0.04~0.25	0.04~0.4	Thread	6.3	12,16,25…42
DN6	0.1~0.6	0.06~0.6	Thread	6.3	12,16,25…42
DN10	0.2~1.2	0.15~1.5	Thread	6.3	12,16,25…42
DN15	0.6~6	0.4~8	Thread(Flange)	6.3,2.5(Flange)	4.0,6.3,12,16,25…42
DN20	0.8~8	0.45~9	Thread(Flange)	6.3,2.5(Flange)	4.0,6.3,12,16,25…42
DN25	1~10	0.5~10	Thread(Flange)	6.3,2.5(Flange)	4.0,6.3,12,16,25…42
DN32	1.5~15	0.8~15	Thread(Flange)	6.3,2.5(Flange)	4.0,6.3,12,16,25…42
DN40	2~20	1~20	Thread(Flange)	6.3,2.5(Flange)	4.0,6.3,12,16,25…42
DN50	4~40	2~40	Thread(Flange)	2.5	4.0,6.3,12,16,25…42
DN65	7~70	4~70	Flange	2.5	4.0,6.3,12,16,25…42
DN80	10~100	5~100	Flange	2.5	4.0,6.3,12,16,25…42
DN100	20~200	10~200	Flange	1.6	4.0,6.3,12,16,25…42
DN125	25~2500	13~250	Flange	1.6	2.5,4.0,6.3,12,16…42
DN150	30~300	15~300	Flange	1.6	2.5,4.0,6.3,12,16…42
DN200	80~800	40~800	Flange	1.6	2.5,4.0,6.3,12,16…42

Reviews

There are no reviews yet.

Be the first to review “Flange Turbine Flow Meter”

Flange Turbine Flow Meter

Description

Technical Parameters

Reviews

Related products

LPG Gas Flow Meter

Sanitary Turbine Flow Meter

Thread Turbine Flow Meter

Product Enquiry